Thanks for the support!

All the guides are available individually or a a combo pack on the ATAC Store, here is the link.

The handles were designed in a way that when you form a grip the foreign debris is pushed out allowing a secure grip of skin against the material. There are no wraps or acute angles where mud or debris could accumulate which could interfere with a secure solid grip.  If foreign debris is not able to escape from a handle, often seen with wraps or a divot inlay, a smooth and slippery surface will result and error is likely. The grips are also available in a low profile thickness; this is your personal choice for the carry usage you desire.

The knife line can also be seen in the photo album on this web site.

Facebook http://www.facebook.com/TomClarkeFanPage

Flicker Tom Clarke Tactical Knives

Squatting has only your feet touching the ground, but becomes a braced position when you include the elbow contact points inside your knees.  This will give you more stability, as you are lower to the ground. Squatting actually has six points of contact to aid in stabilizing your rifle as the sights are aligned on target and will produce an accurate shot, if you are capable of getting into this position correctly.

When you mount a long gun, you pull the gunstock into the shoulder pocket; establish a good stock weld and then a good cheek weld. Your firing hand and support hand grasping the rifle as you pull it back.  This gives you four points of contact we are after for stability. Now add the support of your elbows inside your knees and you will have a very stable shooting foundation. Assisting you also in the management of recoil.

Here is a link to a video on ATAC TV Firearms Channel that teaches you how to and what to practice on the range. Click here to watch the program.

www.VenomTactical.com

Tom Clarke teaching how to present your H&K USC rifle from the ready position.  Tom also goes into detail on what degree of angle you should be at and all the steps that are involved as your bring the rifle up to point in at your target.

In the ready position you already have three of the four points of contact. Once your cheek weld is on the comb if the rifle stock your four points of contact are completed.

1. Firing hand

2. Support hand

3. Stock / Shoulder weld

4. Cheek weld

Permitting the shooter manage the recoil with a solid, stable foundation.  n.

Remember, as the rifle comes up, the safety comes off and your sequence of shooting begins. This is a fast presentation, but must be practiced to get the proper mechanics and sequence habitual.

You can watch the video here:  H&K USC Presenting to the Target ]]> http://www.tommyclarke.com/hk-usc-ready-position-presenting-to-your-target-2012-02/feed http://www.tommyclarke.com/tom-clarke-teaching-how-to-fire-your-hk-usc-from-supported-kneeling-2012-02 http://www.tommyclarke.com/tom-clarke-teaching-how-to-fire-your-hk-usc-from-supported-kneeling-2012-02#comments Sat, 04 Feb 2012 03:23:15 +0000 tclarke http://www.tommyclarke.com/?p=1369 Tom Clarke teaches you how to lower your shooting / firing platform to engage your target from kneeling.  Shooting from kneeling is more stable, lower and very easy to learn.  The guys show you in the video how to practice this firing position on the range.  This is a more stable and lower profile firing position. Now remember, there are two different forms or styles to fire from kneeling. One is supported kneeling and the other in un-supported. Both have their applications in which the situation will dictate how and which kneeling position is correct. This blog only is pointing out the basic supported kneeling and how to practice this on the shooting range.

The supported kneeling give the shooter five points of contact; firing grip, support hand, shoulder or stock weld, cheek weld and also the support hand is additionally supported with the tricep head in front of the knee.  Yes, do not put your elbow on the top of your leg, this simply does not allow stability. The tip of your elbow is pointed and the back of your arm or tricep head lays more stable in front of the knee as show in the picture.

A few tips & Tricks when shooting the HK Rifle:

1. As you start to get into the kneeling fire or shooting position on the range, practice this slow and perfect. Establishing those solid points of contact.

2. Push your nose close to the rear sight, not too far back on the comb of the rifle stock. The (your) eye relief needs to be close to the rear iron sight of the HK Rifle.

3. Do not squeeze the support hand too tight, it is only supporting the rifle.

You can watch the HK USC video on ATAC TV Firearm Channel to pick up some more tips & tricks Here is the link to the Video

Train safe, slow and be consistent and your speed will come.

Beginning with proper grip, Tom Clarke discusses the difference between the firing hand and the support (other) hand.  The H&K USC civilian utility carbine / rifle has an ambidextrous safety or selector switch.  The shooter can manipulate the safety with either side of the receiver on the rifle.

The program point out how the H&K USC stance differs from the H&K UMP full-auto stance, which requires the shooter to be more squared-up for control recoil.  The H&K USC is a .45 ACP cartridge, which won’t “bump you around much”.  While there is not a “perfect” stance, it is still important to find a good basic default stance. Complete Article HERE

As the shooter points the rifle / muzzle in on their target, the selector switch is moved to the fire position.  Once on target, the center of trigger finger is placed on the trigger taking out the slack or free movement of the trigger.  Tom Clarke discusses placing the support hand on the magazine weld or the hand-stop depending on physical limitations, comfort, or the location and elevation of the target.  Tom’s default stance he uses is pulling his elbows in tight, and the toe of the butt stock pulled tightly into the shoulder pocket. Now the shooter has three points of contact and is now going to establish a solid cheek weld, securing all four points of contact. Firing grip, support hand, stock weld and cheek weld.

Tom Clarke and Mark Flinn on the ATC TV Firearms Channel emphasize practicing the basic fundamentals of a default grip and stance to fit your abilities with the H&K USC rifle.  Because a real life situation will not likely occur on a perfectly flat range with little variation, an established default stance provides the ability to maintain upper body stabilization while the lower body may be moving.   With practice, patients you will advance in each step as long as your practice on the range is slow, safe and perfect each and ever repetition.Y

Watch the video here and pick up some finer points, tips and tricks:  Grip and Stance with the H&K USC Carbine

The goal is to get the rifle out as fast as possible, but be sure to push the rifle out to clear your clothing and then pull in with your firing and support hands into your shoulder and establish a cheek weld.Practice it dry, over and over. Some tips and tricks are below

1. Starting with your firing grip and your thumb on the safety.

2. As you push the HK rifle out move the selector switch to the fire position.

3. Pull the rifle into your shoulder pocket and while sliding the comb of the stock into your cheek weld.

4. Now shift your focus to the top of the front sight from the target.

5. The sequence of shooting has begun and now it is up to your trigger control

Tips: Sight alignment, sight picture, trigger control and follow through is the basics of marksmanship. These are the fundamentals that will make you fast as long as you practs this slow on the range perfectly.  Slow perfect practice gives you the end result of fast firearm presentations.

Watch the Video Here to pick up some more tips: H&K USC Muzzle Up Presentation Program

www.ATACTV.com

The sculpted knife consists of grooves on the side of the blade and a serrated edge.

The grooves on the side of the blade are not intended for looks, but instead they serve four purposes. The deviated, surface allows the collection of rust, bacteria and even venom that are often found in harsh environments. When tissue comes into contact with these pathogens or toxins, bacterial infections and other lethal diseases will complicate even the simplest of wounds.  Additionally, the interrupted designed surface allows the cutting edge to function with both pushing and pulling motions increasing efficiency. This would be the opposite of a hacksaw that only cuts on the pulling motion and not the push.  The serrated edge also allows cutting in both wet and dry situations. Try cutting wet rope with a non-serrated blade; it is not easily done.  The final purpose of the sculpted grooves is that it reduces surface friction as it passes through the material by 35+ percent. Thus less energy is required to produce the same damage. For those intimidated by the design of this blade and concerned with the difficulty of sharpening, fear not; by positioning the sharpening rod along the groove these blades can achieve their optimum cutting edge with ease.